UPGRADE ADVANTAGES FOR YOUR LASER ENGRAVER
WITH THE LATEST FIBER LASER SYSTEM

Taking advantage of the latest improvement in laser technology will provide increased capability, reliability, and lowered operational costs. A large power supply, water flow cooling, Q switch and driver, and mechanical shutter are no longer used. The smaller spot size of the beam means better definition of the mark as well as a deeper mark or difficult materials.

Power consumption and continual maintenance are drastically reduced, while the nominal 100,000 hour life of the laser generation unit assures a minimum of operational shutdowns. A main feature is that the new system now operates from a single 117 VAC outlet rather than a three phase source.

The actual upgrade would comprise the removal or disconnection of the old power supply, the YAG head, and all water related items such as pump, reservoir, old telescope. the mirror assemblies, and the shutter. The old three-phase source wiring and circuit breakers are no longer used and may be disconnected or removed. The existing boards may be used for malfunction monitoring.

The existing computer operating system may be used or upgraded to PROLASE. The latest version of this provides many advantages, especially over other laser control systems The new telescope (laser output) will be mounted at the galvanometer input with an adapter specific to the old system. The system is now ready for use. Retuning is no longer required as it is integral with the fiber system.