|
FIBER LASER UPGRADE
UPGRADE ADVANTAGES FOR YOUR LASER ENGRAVER
WITH THE LATEST FIBER LASER SYSTEM
Fiber Lamp Pumped Upgrade
Taking advantage of the latest improvement
in laser technology will provide increased capability,
reliability, and lowered operational costs. A large power
supply, water flow cooling, Q switch and driver, and mechanical
shutter are no longer used. The smaller spot size of the beam
means better definition of the mark as well as a deeper mark or
difficult materials.
Power consumption and continual
maintenance are drastically reduced, while the nominal 100,000
hour life of the laser generation unit assures a minimum of
operational shutdowns. A main feature is that the new system now
operates from a single 117 VAC outlet rather than a three phase
source.
Fiber Diode Pumped Upgrade
The Fiber Diode Pumped upgrade applies to nearly all optically
pumped YAG lasers being especially advantageous for engraving.
The actual upgrade would comprise the
removal or disconnection of the old power supply, the YAG head,
and all water related items such as pump, reservoir, old
telescope. the mirror assemblies, and the shutter. The old
three-phase source wiring and circuit breakers are no longer
used and may be disconnected or removed. The existing boards may
be used for malfunction monitoring.
AVERAGE
LIFETIME OF UPGRADE MODULES IS 10,000 HOURS!
|
Additional benefits: |
-
Reduced production time loss
-
Reduced HVAC load by 20,000 BTU/hr
-
Reduced product loss due to degraded laser
performance
-
Reduced floor space and noise
-
Less
time spent on spares, purchasing and shipping
|
Software Upgrade
The existing computer operating system may
be used or upgraded to CAD Mark. The latest version of this
provides many advantages, especially over other laser control
systems The new telescope (laser output) will be mounted at the
galvanometer input with an adapter specific to the old system.
The system is now ready for use. Retuning is no longer required
as it is integral with the fiber system.
|
SAVINGS
Based on 10 years use with 1 shift operation. |
|
Power
consumption |
54,000
KWH |
$ |
6,480 |
|
Maintenance time |
115 hrs @
$30/hr |
$ |
3,450 |
|
No lamps |
|
$ |
4,960 |
|
No
filters |
|
$ |
3,400 |
|
Downtime
for above |
112
hrs/yr @ $8300/yr |
$ |
83,000 |
|
|
|
|
______ |
|
Total savings over 10 years |
|
$ |
101,290 |
Hai Tech Lasers,
Inc. urges you to take advantage of these latest advances on
your industrial laser marking and laser engraving systems.
Avoid costly unwanted down time and recover your net cost in
less than six years not including other advantages and
savings.
Remember to
call us at (661) 775 0210 for additional details.
We offer
full support and parts as well for all your laser needs.
We
cover the world.
|
